Building With Windows In Mind
There is a lot to think about when designing a home, as many people simply overlook window treatments. In this article, I'm hoping to help you avoid the common pitfalls involved and help you save some money. When using decorative casing such as shutters and 2 inch plantation size wooden blinds, you should always make sure that you have at least 2 1/2". When you have a double or triple window encased within one window opening, you may want to use a vertical trim strips between each window. Make sure that you include this when measuring the depth. Even though it is less common decorating sliding doors, make sure that you include the handle when you measure, as the usual depth for this is 4 inches.
There are several different styles of window treatments, such as circular, arced, eyebrow arched, or even angles. All of them are beautiful and appealing, although very restricted when it comes to choices, especially when you are working with eyebrow and 1/4 arches. When you are dealing with French doors there are a few things to keep in mind. The doors will normally swing open into the home, which could cause problems with the valance you use. Consider using a valance mounted to the door or allowing the doors to swing outward.
When you are considering shades, blinds, or shuters, don't forget to consider the handles and locks. Make sure that when you are considering window treatments that you remember window placement as well. There are many restrictions when you have chair rails or base boards going around the opening of the window. There could also be a problem with the placement of the drapery as well. The drapery may not stack back sufficiently or the outside edge may not extend to the outside of the window. Things can go much easier if you have the same amount of space on each side of the window, so you should try to center the window whenever you can. When you place the window, make sure that you leave enough space between the top of the window and the ceiling. There should be at least 2 inches for bracket placement. When installing a wood header, make sure that it extends to the ceiling and that the heavier treatments are mounted in the wood. If you aren't using wood headers but instead mounting into sheetrock you should use molly or toggle bolts for the best possible protection.
There are other things you need to consider when it comes to windows. First, you'll need to make sure that all windows are accessible even those in an unfinished attic. This will help make things easier for future decorating or expansion of the room. Also, make sure that the windows in the room are the same style. (word count 466) PPPPP.
Roller Shutter Installers Articles
Roller Shutter Installers Books
Roller Shutter Installers